BNZHJ - 12D93 SATIN LATEX-NEUTRAL BASE

  • MSDS: BNZHJ
  • Manufacturer: YENKIN MAJESTIC PAINT CORP
  • Product Name: 12D93 SATIN LATEX-NEUTRAL BASE
  • National Stock Number: 8010-00F025169
Product Identification

Product ID:12D93 SATIN LATEX-NEUTRAL BASE
MSDS Date:12/16/1985
FSC:8010
NIIN:00F025169
MSDS Number: BNZHJ

Responsible Party
YENKIN MAJESTIC PAINT CORP
E 5TH AVE & LEONARD AVE
COLUMBUS, OH 43219
US

Emergency Phone: 614-253-8511

Info Phone: 614-253-8511

Cage: 91708

Contractor
YENKIN MAJESTIC PAINT CORP
COLUMBUS, OH 43219 US

Telephone: 614-253-8511

Cage: 91708

Ingredients

CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/CUM (DUST)

ACGIH TLV: 10 MG/CUM (DUST)


9.09

RTECS: 9999999WG


1.47 LB/GAL (MINUS WATER)

RTECS: 9999999VO


PHENYL MERCURY ACETATE (PMA), (ACETOXYPHENYLMERCURY)

CAS: 62-38-4

RTECS: OV6475000

Fraction By Weight: 0.045%

ACGIH TLV: 0.1 MG(HG)/M3

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
HEADACHE & NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: IRRITATION. INHALATION: HEADACHE &
NAUSEA.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: DRINK 1 OR 2 GLASSES OF WATER. INDUCE VOMITING. OBTAIN
MEDICAL ATT ENTION IN ALL CASES.

Fire Fighting

Flash Point:>200F
Lower Limits:2.6%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL & WATER FOG
Fire Fighting Procedures:IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
WATER IS INEFFECTIVE. USE SCBA & FULL PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT DUE TO STEAM BUILD-UP. KEEP COOL W/WATER TO
PREVENT PRESSURE BUILDUP & POSSIBLE AUTOIGNITION.

Accidental Release

Spill Release Procedures:LIMIT SPREAD OF SPILL/LEAK. SOAK UP W/INERT
ABSORBENT MATERIAL. KEEP OUT OF SEWERS & DRAINS.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING. AVOID EXTREME
HEAT. DON'T STORE >100F. VENTILATE AREA. AVOID CONTACT W/SKIN.
Other Precautions:DON'T TAKE INTERNALLY. KEEP CLOSURE TIGHT & CONTAINER
UPRIGHT TO PREVENT LEAKAGE. DON'T FLAME/CUT/WELD/BRAZE OR ABRADE
SURFACES W/THIS MATERIAL CURED ON THEM W/OUT APPROVED RESPIRATOR OR
ADEQUATE VEN TILATION. AVOID BREATHING SANDING DUST.

Exposure Controls

Respiratory Protection:USE RESPIRATOR W/CHEMICAL FILTER
Ventilation:SUFFICIENT IN VOLUME & PATTERN TO KEEP Protective Gloves:RUBBER OR POLYETHYLENE
Eye Protection:SAFETY GLASSES/SPLASH GUARDS/SIDE SHIELD
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM.
REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
BOILING RANGE: 212-370F.

Chemical Properties

Boiling Pt:B.P. Text:SEE SUPP.
Vapor Density:Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume: 75.6%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING, TEMPS >100F
Hazardous Decomposition Products:CO2, CO, OXIDES OF NITROGEN & OTHER
PRODUCTS OF COMBUSTION

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. APPROVED LANDFILL, APPROVED HAZARDOUS WASTE
SITE OR INCINERATION. COMBUSTIBLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.